MW-341 RW RFID 13,56 Mhz Stand-Alone / Online Access Controller and Writer

MW-341 RW RFID 13,56 Mhz Stand-Alone / Online Access Controller and Writer

Moonwell MW-341 RW Stand Alone / Online RFID Card Reader and Writer is a very useful product with its 2000 card memory, adjustable relay time, reading distance and reading commands up to 7 cm and fast operation.


MW-341 RW RFID 13,56 Mhz Stand-Alone / Online Access Controller and Writer

MW-341 RW 13,56 Mhz RFID Kart Okuyucu ve Yazıcı ,
şık dizaynı ile iç ortamlarda uygun olarak kullanılabilen RFID kart okuyucu ve yazıcıdır.
Kartlı geçişe uygun olarak ve geçiş kontrol paneline bağlanarak turnike ve kapı açma özelliğine sahiptir.
Hızlı çalışma performansına sahip olan ve üzerinde ikaz işareti bulunan MW-341 RW kart okuyucu / yazıcı
ve dahili buzzer özelliği ile gerçekleştirilen her işlemde sesli uyarı verir.

With these features, the MW-341 RW 13.56 Khz card reader is not only for small businesses, homes, apartments and site management, but also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons. access control It is an ideal product for access control applications. Moonwell MW-341 RW card reader is used in all kinds of doors and points.

  •  Stand-Alone / Online working modes
  •  13.56 Mhz (Mifare) working frequency
  •  It allows both card reading and card writing. (max. 7 cm reading distance)
  •  While Stand-Alone is running, it keeps 2000 cards in its memory. (Optional 4000 Cards)
  •  It has adjustable relay time between 1-8 seconds in stand-alone mode. (Adjustable with potentiometer on the device)
  •  In online mode It has a software adjustable relay time 1-30 between secs.
  •  In the online mode, when there is no computer connection, it has the ability to switch to automatic stand-alone mode and continue to work without trouble.
  •  useful with 2 leds and a Piezo buzzer.
  •  It adapts to the required systems with the exit button and magnetic contact inputs.
  •  It provides communication with 1 RS232 / 485, 1 RS232 communication port.
  •  It allows to use 64 devices on the same RS485 bus cable.
  •  It has Wiegand 26/34 output port.
  •  It works with 12V-24V DC supply voltage.
  •  max 300mA power consumption
  •  Whether NO or NC relay output (maximum 120V AC / 30V DC relay voltage, 2A relay current)
  • Mifare Read and Write Commands:  Get Card Serial Number,  Read Block,  Write Block,  Initialize Block,  Increment Block,  Decrement Block
  • Dimensions (HxWxD): 11 x 5 x 2cm


There are no reviews yet.

Be the first to review “MW-341 RW Stand-Alone / Online 13,56 Mhz RFID Kart Okuyucu ve Yazıcı”

tr_TRTürkçe en_USEnglish